Simplex Network Card 4100-6078

المواصفات الفنية

Wire Size and Specifications

18 AWG Unshielded Twisted Pair (UTP):

• Maximum of 58 pF/ft. (190 pF/m) between conductors; shielded cable is allowed.
• Data Rate (baud): 9600
• Distance: 17,000 ft (5.4 km)
• Distance Note: Distance is with or without isolated loop protector or over-voltage protectors.

24 AWG Telephone Cable Unshielded Twisted Pair (UTP):

• Maximum of 22 pF/ft (72.2 pF/m) between conductors; overall shielded cable is allowed.
• Data Rate (baud): 57.6 k
• Distance: 10,000 ft (3 km)

24 AWG Telephone Cable Unshielded Twisted Pair (UTP):

• Maximum of 22 pF/ft (72.2 pF/m) between conductors; overall shielded cable is allowed.
• Data Rate (baud): 9600
• Distance: 12,000 ft (3.65 km)

24 AWG Telephone Cable Unshielded Twisted Pair (UTP):

• Maximum of 22 pF/ft (72.2 pF/m) between conductors; overall shielded cable is allowed.
• Data Rate (baud): 57.6 k
• Distance: 7,000 ft (2.13 km)
• Note: Shielded cable and circuit protection is required when wiring leaves the building.

Fiber TypeMulti-mode 50/125 or 62.5/125, numerical aperture = 0.275:

• MIFL: 1.5 dB/km at 1300nm
• Power Margin: 15 dB
• Safety Margin: -3 dB
• Maximum Distance: 16400 ft (5 km)
• Power Budget: 18 dB
• Coupler/Splice Loss: .75dB max for each mated pair connection; .30dB max for each fusion splice

Single-mode 9/125, numerical aperture = 0.2:

• MIFL: 1 dB/km at 1310nm
• Power Margin: 19 dB
• Safety Margin: -3 dB
• Maximum Distance: 82000 ft (25 km)
• Power Budget: 22 dB
• Coupler/Splice Loss: .75dB max for each mated pair connection; .30dB max for each fusion splice

Fiber Media Notes:

1. Fiber Type for Duplex Fiber Optic: Cable specifications are for 50 or 62.5 micron core with 125 micron cladding multi-mode graded index fiber or 9micron core with 125 micron cladding single-mode fiber.⁷⁸
2. MIFL: Maximum individual fiber loss. Numbers shown are industry⁹ standard reference; refer to specific cable for exact specifications.¹⁰
3. Distance: The maximum distance between nodes is determined by the total loss from the transmitter to the associated recei¹¹ver (fiber loss, connector loss, splice loss and power margin), or the maximum distance listed, whichever is smaller.
4. Power Budget: Use attenuation measurements at the following wavelengths: Multi-mode at 1300nm, Single-mode at 1310nm.