Attenuator, volume control. AT-603AP - Image 2

Attenuator, volume control. AT-603AP - Image 3

Attenuator, volume control. AT-603AP

The AT-603AP is a flush-mounted wall attenuator that uses a transformer, allowing connection of a wide range of loads ( $60 W$ or less). You can adjust the volume in five steps. This model features a push-in terminal block for easy connection.

Attenuation: $5$ step attenuation: „OFF“, $- 18 dB$ , $- 12 dB$ , $- 6 dB$ , $0 dB$
Connection: Push-in connector allows quick terminal cable connection
Finish:
- Knob, panel, plate: ABS resin, white (RAL 1013 or equivalent)
- Case: ABS resin, black
Rated Load: $60 W$

Have a question

DOWNLOAD DATASHEET

SKU:AT-603APCategories:Sound SystemsTags:Attenuator, Sound control, Sound system, volume control

AT-603AP Attenuator: Specifications

Input Capacity: $0.5 W - 60 W$
Attenuation: $5$ steps: $0 dB$ , $- 6 dB$ , $- 12 dB$ , $- 18 dB$ , OFF
Cable Requirements:
- $600 V$ vinyl-insulated cable (Indoor Vinyl or Heat-resistant Indoor Vinyl cable)
- Solid cable: $Ø 0.8 (0.03″) - Ø 1.6 (0.06″) mm$
Terminal: Push-in connector
Operating Temperature: $- 10 °C to + 50 °C$
Finish:
- Knob, panel, plate: ABS resin, white (RAL 1013 equivalent)
- Case: ABS resin, black
Dimensions:
- $70 (W) x 120 (H) x 52.4 (D) mm (2.76″ x 4.72″ x 2.06″)$ (with plate)
- $41 (W) x 108 (H) x 52.4 (D) mm (1.61″ x 4.25″ x 2.06″)$ (attenuator only)
Weight: $210 g (0.46 lb)$ (unit only)
Included Accessories: Plate $\dots 1$ , Plate mounting screw $\dots 2$ , Box mounting screw $\dots 2$
Recommended Plate: YP-1AF (option)
Compatible Box: YS-11A (option)

Sat - Thu, 9:00 am - 4:00 pm

+20 12 7576 8869

Attenuator, volume control. AT-603AP

AT-603AP Attenuator: Specifications

Attenuator, volume control. AT-603AP

AT-603AP Attenuator: Specifications

We are here to answer any question you may have.